QUALITY CUSTOMIZABLE FILTRATION SYSTEMS

Solutions for fluid contamination issues.

Industries we work with

Oil_Gas
Oil & Gas, and Petrochemical
Electricity
Power Generation
Trucks
Mining

Brings fluid contamination problems under control

4 Simple Steps

1) Speak to an expert.

2) We assess your needs.

3) We recommend a solution.

4) We install your equipment

Why Work With HMFT?

HMFT can bring your fluid contamination problems under control, cost-effectively with HILCO's full range of engineered filters, cartridges, reclaimers, coolant recyclers & fluid conditioning systems. We go beyond filters to provide a full-service fluids management process, from obtaining samples to fluid analysis, consulting on equipment, field techs, start-up help, and more.

HILCO Products reduce the cost of new oil purchases, decrease disposal costs, lessen component wear, reduce downtime and help curtail environmental contamination.

The reliability and efficiency of any filtration system are chiefly dependent on the quality of the cartridges used in it. HILCO has a full line of filter cartridges for virtually every application depending on size, filtration efficiencies, and dirt-holding capacity. Most fluids can be restored to a like-new condition. HILCO’s on-site testing facility is continuously examining and improving cartridge performance as customer’s needs evolve. HILCO is a major supplier to original equipment manufacturers worldwide.

HMFT has been providing filtration solutions for over 70 years. Our experienced sales, service, and engineering staff is ready to help you with your filtration requirements. Contact us today to speak to an expert.

MistEliminator-Icon

The HILCO® Oil Mist Eliminator is the answer to economically reclaiming the oily vapor found in the air stream of vents of lubricating oil systems on large, high-speed rotating equipment. These include gas turbines, steam turbines, turbo compressors, reciprocating engines, and gearboxes. The Oil Mist Eliminator improves safety by eliminating oily residue caused by setting oil mist on engine room floors, equipment, and stairways. It also keeps the environment clean and helps prevent exterior oil contamination of buildings and grounds. Two versions are available. Coalescer only and coalesce with blower and silencer. Both models with coalescers eliminate oil mist with 99.97% efficiency.

Coalescer-Icon

Water and oil don’t mix, especially when it comes to lube oil for steam turbines. Many steam turbines lube oil packages were not filled with coalescers as original equipment. This provides an excellent application for Hilcosep, which reduces water levels in lube oil, thereby extend the equipment life and reducing the possibility of failure. The HILCO Coalescer Separator removes moisture and contamination from steam turbine lube oils which have good water separability and are commonly found in the power generation industry. Other applications may include refineries, chemical plants, heavy industry, and steel mills.

TransferValve-Icon

HILCO Transfer Valves assure positive sealing for uninterrupted flow and a low-pressure drop. They feature a spring-loaded pad and shaft design with large cross-section o-ring seals. The turning mechanism features a choice of handle, wormgear, or actuator designs to meet your requirements. Mini three-way and six-way transfer valves have been placed in service over the years. Older style valves, such as straight or tapered plug designs, leak substantially. They can potentially pour dirty oil downstream (filter applications) and require high maintenance. HILCO® Offers both its current and new designs to replace most of these inferior valves.

GIE-filter-Icon

Many fluid users are changing to synthetic lube and hydraulic oils because of the improved fire resistance in the resultant lower insurance costs. But synthetic oils can break down and form acid. If proper acid levels are not maintained, the situation can get out of control. HILCO® Selexsorb® and ion exchange systems keep the acid concentration low and keep these expensive oils in premium condition.

Duplex-Icon

Compressors with only single filters on their lube systems can be upgraded to duplexes to ensure no interruption of service during cartridge change. Consider upgrading the performance of the elements by switching to a more efficient PH cartridge to extend lube oil life. HILCO offers a wide variety of standard duplex filter products as well as custom engineered configurations for your individual application.  Duplex full flow designs are available allowing for continuous flow during fluid transfer and cartridge change out with the added benefit of elimination of potential gasket leak points with our welded in valve design.   Bolt-in valve designs remain available.  We are an ISO 9001:2015 certified organization with a fully accredited weld shop which gives us the ability to manufacture and test a wide variety of filter arrangements.  A range of materials of construction is available as well as a diverse offering of components and certifications based on your unique specifications

Portable-Icon

Every customer using lube oil hydraulic oil need Amin to transfer, treat, and/or filter it. HILCO® filtration systems are available in many sizes and flow ranges with options to make them easy to use and handle. Available with air-powered pumps as well as motor-driven gear pumps, they can be used with any standard HILCO® cartridges, including Hilsorb® dryer elements, which absorb water from oil while removing solids. New: the HP4 Portable is an affordable, lightweight, 4-GPM portable with a gear pump and continuous-duty motor. HILCO portable filters are an economical solution for removing water and particulate from oils, fuel, and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes Solvents Coolants, and cutting oils Vacuum pump oils.

Reclaimer-Icon

The cost of disposing of used oil is on the rise. Much of this increase is due to the fact that the cost to truck the oil across the road is getting more difficult. Why dispose of the oil when in most cases it can be reconditioned to like new with a HILCO® Reclaimer?  HILCO® has been making reclaimers since 1925 and has the know-how to do it right. Hilliard reclaimers are ideally suited for reclaiming insulating or refrigeration compressor oils or for any application which requires a high degree of purification. Reclaimers restore contaminated oils to a like-new condition. Dirty oil can be purified and re-used to save on oil costs. Simple to operate, easy to maintain, this system extends fluid life and greatly decreases costs for waste disposal and purchase of new fluids. No matter what degree of purification or type of contaminants your application involves, Hilco has a reclaimer to fit the situation.

OilConditioning-Icon

HILCO Dry Resin Ionic Exchange cartridges are a highly effective solution for reducing TAN levels in phosphate ester fluids as well as reducing varnish potential in both mineral and synthetic fluids.  Hilco’s Dry Resin Ionic exchange is a cost-effective treatment method when used in a kidney loop arrangement that has 7 times the acid scavenging capacity of Fullers Earth and nearly 3 times the capacity of Selexsorb while adding nothing to the fluid. HILCO Dry Resin Ionic Exchange resin cartridges are rapidly becoming the international choice for reducing Total Acid Number (TAN) in phosphate ester-based synthetic oils as well as lubricating, hydraulic, and insulating oil systems.

PH-filter-Icon

In today’s world, the lighter the filtration the better. The new synthetic filter media in HILCO’s PH cartridge line can handle high flows with relatively low-pressure drop compared to cellulose paper cartridges. In fact, our cartridge will allow you to increase your efficiency and reduce your pressure drop across the cartridge. These durable cartridges stand up to continued use without softening and deterioration as a result of exposure to water. The key is an advanced synthetic media that provides maximum filtration with minimum pressure drop.

The HILCO® Oil Mist Eliminator is the answer to economically reclaiming the oily vapor found in the air stream of vents of lubricating oil systems on large, high-speed rotating equipment. These include gas turbines, steam turbines, turbo compressors, reciprocating engines, and gearboxes. The Oil Mist Eliminator improves safety by eliminating oily residue caused by setting oil mist on engine room floors, equipment, and stairways. It also keeps the environment clean and helps prevent exterior oil contamination of buildings and grounds. Two versions are available. Coalescer only and coalesce with blower and silencer. Both models with coalescers eliminate oil mist with 99.97% efficiency.

Water and oil don’t mix, especially when it comes to lube oil for steam turbines. Many steam turbines lube oil packages were not filled with coalescers as original equipment. This provides an excellent application for Hilcosep, which reduces water levels in lube oil, thereby extend the equipment life and reducing the possibility of failure. The HILCO Coalescer Separator removes moisture and contamination from steam turbine lube oils which have good water separability and are commonly found in the power generation industry. Other applications may include refineries, chemical plants, heavy industry, and steel mills.

HILCO Transfer Valves assure positive sealing for uninterrupted flow and a low-pressure drop. They feature a spring-loaded pad and shaft design with large cross-section o-ring seals. The turning mechanism features a choice of handle, wormgear, or actuator designs to meet your requirements. Mini three-way and six-way transfer valves have been placed in service over the years. Older style valves, such as straight or tapered plug designs, leak substantially. They can potentially pour dirty oil downstream (filter applications) and require high maintenance. HILCO® Offers both its current and new designs to replace most of these inferior valves.

Many fluid users are changing to synthetic lube and hydraulic oils because of the improved fire resistance in the resultant lower insurance costs. But synthetic oils can break down and form acid. If proper acid levels are not maintained, the situation can get out of control. HILCO® Selexsorb® and ion exchange systems keep the acid concentration low and keep these expensive oils in premium condition.

Compressors with only single filters on their lube systems can be upgraded to duplexes to ensure no interruption of service during cartridge change. Consider upgrading the performance of the elements by switching to a more efficient PH cartridge to extend lube oil life. HILCO offers a wide variety of standard duplex filter products as well as custom engineered configurations for your individual application.  Duplex full flow designs are available allowing for continuous flow during fluid transfer and cartridge change out with the added benefit of elimination of potential gasket leak points with our welded in valve design.   Bolt-in valve designs remain available.  We are an ISO 9001:2015 certified organization with a fully accredited weld shop which gives us the ability to manufacture and test a wide variety of filter arrangements.  A range of materials of construction is available as well as a diverse offering of components and certifications based on your unique specifications

Every customer using lube oil hydraulic oil need Amin to transfer, treat, and/or filter it. HILCO® filtration systems are available in many sizes and flow ranges with options to make them easy to use and handle. Available with air-powered pumps as well as motor-driven gear pumps, they can be used with any standard HILCO® cartridges, including Hilsorb® dryer elements, which absorb water from oil while removing solids. New: the HP4 Portable is an affordable, lightweight, 4-GPM portable with a gear pump and continuous-duty motor. HILCO portable filters are an economical solution for removing water and particulate from oils, fuel, and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes Solvents Coolants, and cutting oils Vacuum pump oils.

The cost of disposing of used oil is on the rise. Much of this increase is due to the fact that the cost to truck the oil across the road is getting more difficult. Why dispose of the oil when in most cases it can be reconditioned to like new with a HILCO® Reclaimer?  HILCO® has been making reclaimers since 1925 and has the know-how to do it right. Hilliard reclaimers are ideally suited for reclaiming insulating or refrigeration compressor oils or for any application which requires a high degree of purification. Reclaimers restore contaminated oils to a like-new condition. Dirty oil can be purified and re-used to save on oil costs. Simple to operate, easy to maintain, this system extends fluid life and greatly decreases costs for waste disposal and purchase of new fluids. No matter what degree of purification or type of contaminants your application involves, Hilco has a reclaimer to fit the situation.

HILCO Dry Resin Ionic Exchange cartridges are a highly effective solution for reducing TAN levels in phosphate ester fluids as well as reducing varnish potential in both mineral and synthetic fluids.  Hilco’s Dry Resin Ionic exchange is a cost-effective treatment method when used in a kidney loop arrangement that has 7 times the acid scavenging capacity of Fullers Earth and nearly 3 times the capacity of Selexsorb while adding nothing to the fluid. HILCO Dry Resin Ionic Exchange resin cartridges are rapidly becoming the international choice for reducing Total Acid Number (TAN) in phosphate ester-based synthetic oils as well as lubricating, hydraulic, and insulating oil systems.

In today’s world, the lighter the filtration the better. The new synthetic filter media in HILCO’s PH cartridge line can handle high flows with relatively low-pressure drop compared to cellulose paper cartridges. In fact, our cartridge will allow you to increase your efficiency and reduce your pressure drop across the cartridge. These durable cartridges stand up to continued use without softening and deterioration as a result of exposure to water. The key is an advanced synthetic media that provides maximum filtration with minimum pressure drop.

Speak To An Expert

Fill out the form below and one of our experts will contact you.